Last updated: October 2, 2026
If you searched “how to reset Litter-Robot,” you’re asking one of several different questions — and the answer depends on your model. On the Litter-Robot 3, the Reset button zeroes the cat sensor. On the Litter-Robot 4, a “hard reset” is a deeper reboot done two specific ways. On the Litter-Robot 5, there’s a separate factory reset that restores the unit’s settings. These are not interchangeable: using the wrong one wastes time, and a factory reset wipes settings you may have wanted to keep.
Every procedure below comes from Whisker’s current official documentation. Where Whisker doesn’t document a procedure for a model, we say so instead of guessing.
What Do You Actually Need to Reset?
Start here. Match your situation to the right action:
- I emptied the drawer, added or removed litter, or moved the robot. You need a sensor reset, not a full reset. LR3 / LR4: press the Reset button with the globe at the Home position and the blue light (bar) on. LR5: there is no physical Reset button — let the unit finish starting up; if it misbehaves afterward, do a hard reset.
- The robot is showing an error or won’t cycle. Don’t start with a reset. Clear any obstruction, clean the sensors, reseat the bonnet, and check the drawer and litter level first. A reset won’t fix a mechanical or sensor problem.
- Power cycling didn’t fix it. Move to a hard reset (LR4 / LR5 — see below).
- Wi-Fi or setup keeps failing. LR5: do a hard reset first; if onboarding shows “secure session” errors, Whisker directs a factory reset. LR4: do a hard reset.
- I want a fresh start, or I’m selling or giving away the robot. Factory reset — but only the LR5 has an officially documented one. For the LR3 / LR4, Whisker doesn’t document a user-accessible factory reset; contact Whisker support instead.
- The scale or sensor readings seem off. LR3 / LR4: press the Reset button. LR5: let startup finish; hard reset if problems persist.
Reset Types Compared by Model
| Litter-Robot 3 | Litter-Robot 4 | Litter-Robot 5 | |
|---|---|---|---|
| Sensor reset (Reset button) | Yes — press and release at Home + blue light | Yes — press at Home + blue light bar | No physical Reset button |
| Power cycle | Yes — unplug about 15 seconds | Yes — unplug 15 seconds | Yes — or hold Power 6 sec (hard reset) |
| Hard reset | Not documented | Yes — unplug 15 sec OR hold Reset + Connect 3 sec | Yes — hold Power 6 sec while ON |
| Factory reset | Not documented | Not documented | Yes — hold Cycle + Cancel 3 sec while ON |
Litter-Robot 3
Sensor reset (the Reset button)
- What it does: Resets the cat sensor — think of it as zeroing a scale. It recalibrates the weight sensor and circuit board to the unit’s current weight.
- When to use it: After emptying the waste drawer, adding or removing litter, or moving or cleaning the unit. Also after a cat-sensor fault (flashing red) once the cat has exited.
- Exact procedure: With the globe at the Home position and the blue light on, press and release the Reset button.
- What happens afterward: The sensor recalibrates; a solid blue light means the unit is ready.
- What it does NOT fix: Mechanical faults, jams, or errors that need real diagnosis.
- Note: This button does other things too — pressed during a cycle it pauses (press again while paused to abort); pressed with the red light on it cancels the cycle delay; press-and-hold activates control panel lockout (blue light blinks). Don’t hold it if you only want a sensor reset.
Power cycle
Unplug the unit, wait about 15 seconds, plug it back in, and power it on. Let it complete its startup cycle.
No documented hard reset or factory reset
Whisker doesn’t publish a hard-reset or factory-reset procedure for the LR3. The sensor reset and power cycle above are the documented options. Don’t follow third-party “button combo” resets for the LR3 — they aren’t official.
Litter-Robot 4
Sensor reset (the Reset button)
- What it does: Resets the cat sensor(s).
- When to use it: After anything that changes the unit’s weight — emptying the drawer, adding or removing litter, moving the unit.
- Exact procedure: With the globe at the Home position and the blue light bar on, press the Reset button.
- What happens afterward: The sensors recalibrate; a blue light bar means ready.
- What it does NOT fix: Faults that need diagnosis.
- Note: Pressed during a cycle it pauses (press again to abort); with the red light bar on it cancels the cat-sensor wait time; a 3-second hold toggles the night-light setting — that is not a reset.
Hard reset (official)
- What it does: A deeper reboot for when power cycling doesn’t resolve the issue.
- When to use it: When power cycling didn’t resolve the issue.
- Exact procedure — two official methods, either one works: Method 1: unplug the unit for 15 seconds, plug it back in, and power it on. Method 2: press and hold the Reset and Connect buttons together for 3 seconds, then power the unit on.
- What happens afterward: The unit restarts and runs its initialization.
- What it does NOT fix: Mechanical problems, obstructions, or dirty sensors.
No documented factory reset
Whisker doesn’t document a separate user-accessible factory reset for the LR4 — the hard reset above is the deepest officially documented reset. Ignore third-party “factory reset” button combos for the LR4; they aren’t in Whisker’s documentation.
Litter-Robot 5
The LR5 has no physical Reset button — its panel has Power, Cycle, Cancel, Empty, and Connect. Resets work differently here.
Hard reset
- What it does: Similar to unplugging the unit and plugging it back in. Use it when powering the unit off and on doesn’t resolve an error.
- When to use it: An error persists after a normal power cycle.
- Exact procedure: With the unit powered ON, press and hold the Power button for 6 seconds, then release and wait for the reboot.
- What happens afterward: The unit reboots.
Factory reset
- What it does: Restores the Litter-Robot’s factory settings. Whisker recommends it during troubleshooting or before transferring ownership of the robot.
- Before you do this: A factory reset restores factory settings. Whisker states the latest downloaded firmware is maintained — it is not wiped. Whisker’s docs don’t detail what happens to Wi-Fi or app pairing, so expect to redo onboarding afterward.
- Exact procedure: With the unit powered ON, press and hold the Cycle and Cancel buttons together for 3 seconds. The LED indicator blinks red and the LCD screen shows instructions — follow them to confirm and complete the process.
- What happens afterward: Factory settings are restored, firmware stays at the latest downloaded version, and you’ll complete onboarding again.
- What it does NOT fix: Anything mechanical — and it’s overkill as a first step for simple errors.
What About the Litter-Robot EVO?
Whisker hasn’t published EVO-specific reset instructions on its official support site. The EVO user manual describes the same 6-second Power-button hard reset and Cycle + Cancel factory reset as the LR5 — if you own an EVO, follow your model’s user manual. We’ve left EVO out of the steps above rather than present unverified procedures as fact.
When Reset Is the Wrong First Step
A reset doesn’t fix the underlying cause of most faults. If Whisker’s troubleshooting says to check something first, do that first:
- Obstruction or jam — clear it first.
- Dirty sensors — clean them first.
- Bonnet removed or misaligned — reseat it.
- Waste drawer full — empty it.
- Litter over the fill line — correct the level.
- A specific light pattern — diagnose the light first.
Repeated resets don’t fix mechanical or sensor problems — they just delay the real fix.
If Resetting Didn’t Fix It
Match what you still see:
- Yellow light flashing — Litter-Robot flashing yellow light guide
- Blue light flashing — Litter-Robot flashing blue light guide
- Red light flashing — Litter-Robot flashing red light guide
- Globe won’t rotate — Litter-Robot not cycling guide
Sources
- Whisker — Litter-Robot 3: The Reset Button
- Whisker — Litter-Robot 3: Button Functions
- Whisker — Litter-Robot 4: Hard Reset Instructional Guide
- Litter-Robot 4 User Manual — Control Panel Button Functions
- Whisker — Litter-Robot 5: Control Panel Buttons & Functions
- Whisker — Litter-Robot 5: Not Connecting
Manufacturer documentation is the primary source for this guide. Any practical sequencing or emphasis beyond Whisker’s stated steps is editorial judgment, not manufacturer instruction.
Editorial responsibility: Mohammed Algaari — Founder & Editor