-
PetSafe ScoopFree Rake Stuck? Read the Light Before You Force Anything
Your ScoopFree starts a cleaning cycle and the rake stops halfway — or it won’t move at all and the rake button glows solid red. The instinct is to push the rake or yank parts loose. Don’t. Forcing the rake can damage the track, the rake covers, or the waste trap cover. Read the light…
-
PetSafe Microchip Cat Door Won’t Unlock? Read the LED Before You Reprogram Anything
If your PetSafe microchip cat door won’t unlock, start with two facts: what the LED is doing right now, and whether this cat was ever successfully programmed. The LED shows the door’s current operating state — it does not by itself prove a chip was stored or recognized. A green light during motion, for example,…
-
Catit PIXI Fountain Pump Stopped? Read the Pump Light Before You Clean Anything
If your Catit PIXI fountain stops moving water, check the pump light and reservoir level before taking the pump apart. The pump light reports four documented states, and the state you are in decides which documented check comes first — cleaning is only one of the paths. Scope: This guide covers the Catit PIXI Fountain,…
-
SureFeed Microchip Pet Feeder Won’t Open? Separate a Learn Problem From a Chip-Read Problem (MPF001)
The lid on a SureFeed only opens when the reader in the front hoop reads a microchip the feeder has already stored. So “won’t open” is not one problem. Your cat’s chip may never have been learned in the first place. It may have been learned and then stopped reading — dirt on the hoop…
-
PetSafe ScoopFree SmartSpin Will Not Clean? Start With the Cleaning Method That’s Failing
“My SmartSpin will not clean” sounds like one problem. On this box, it isn’t. A ScoopFree SmartSpin can fail to clean in three different ways — it doesn’t run on its own after your cat, the Cleaning Button on the front panel does nothing, or a cycle started from the app never happens — and…
-
SureFlap Not Reading Microchip? Why Your Cat Flap Won’t Unlock (SUR001)
Last updated: October 25, 2026 Your SureFlap Microchip Cat Flap will not unlock for your cat. Either it never learned the microchip in the first place, or it worked for months and then stopped reading it, or the flap seems to respond but the catch does not open. Those are three different problems – and…
-
Neakasa M1 Says the Waste Bin Is Full (But It Isn’t)? False-Full Alerts & Sensor Fixes
Last updated: October 2, 2026 Your Neakasa M1 is flashing a red Empty light and refusing to run its empty cycle — but when you pull the waste bin out, it’s nowhere near full. Before you clean anything or assume the sensor is dead, run one 30-second test: check whether the bin is actually full.…
-
PETLIBRO Feeder Not Dispensing? Manual Feed Test, Jam Fixes & Motor Checks (Model-by-Model)
Last updated: October 2, 2026 Your PETLIBRO feeder isn’t dropping food. Before you clean anything, reset anything, or assume the motor is dead, do one 30-second test: trigger a manual feed and watch what happens. That single test tells you which of two completely different problems you have — a scheduling/app problem or a physical…
-
Litter-Robot 5 LitterHopper Disconnected or Not Dispensing? Fixes for LR5 & 5 Pro
Last updated: October 25, 2026 The LitterHopper is the automatic litter-refill accessory for the Litter-Robot 5 and 5 Pro – it holds about 17 cups of litter and tops up the globe on its own. When it works, you rarely think about it. When it shows “Hopper Disconnected,” stops dispensing, or jams, it gets confusing…
-
How to Reset a Litter-Robot: Reset Button, Hard Reset & Factory Reset (LR3 vs LR4 vs LR5)
Last updated: October 2, 2026 If you searched “how to reset Litter-Robot,” you’re asking one of several different questions — and the answer depends on your model. On the Litter-Robot 3, the Reset button zeroes the cat sensor. On the Litter-Robot 4, a “hard reset” is a deeper reboot done two specific ways. On the…